Vehicle battery charger

Diagnostics and flashing

Parallel consumers are supplied with energy during diagnostics and when flashing control units. The charger delivers a current of 35 A for this purpose and the battery voltage of 6 V, 12 V or 24 V is pre-selected automatically.

Charging

The charger initiates the charging process automatically at a battery voltage of 2 V. The Plug & Charge feature enables fully automatic charging of the vehicle battery and buffering of parallel consumers during restricted time frames for service work.

Refresh mode

This mode regenerates deeply discharged batteries (desulphation). This process involves an IUIoU characteristic curve controlled by a micro-processor.

Battery change

Back-up mode ensures that all user settings in the vehicle are retained when the battery is changed.

Power supply mode

Guarantees an external power supply without support from the battery.

Replacing

Data back-up function: If the vehicle battery is removed or replaced, saved data (e.g. radio, clock settings etc.) is retained. The charger temporarily acts as a power supply in place of the battery.